Videx VX2200 Guide de dépannage télécharger pdf (Page 25)

PAGE 25 of 68 VX2200 TECHNICAL MANUAL VER1.5

3. The operator can delete the call by pressing “#” or call them back by pressing “*”:

a) If the operator chooses to delete the call, the concierge restarts from step (2) showing the next

booked call (if there are other booked calls), otherwise it goes back to the stand-by condition (the

display shows the message relevant to selected operation mode);

b) If the operator choose to take the call, the concierge calls the user;

4. The display shows the message “CALLING”; if the apartment doesn’t answer, the operator can replace

the handset and restart from step (1). If the apartment answers, the display will show the message

“SPEAK”; operator and user are connected and the apartment can choose to close the conversation or

to ask the operator to be connected with another apartment (intercommunication):

a) If the apartment replaces the handset, the conversation ends; if there are other calls to answer (the

concierge rings) the operator can restart from step (1) otherwise the concierge will return to the

stand-by condition;

b) If the apartment requests intercommunication with another apartment, the operator must enter the

apartment number requested on the keypad and then press “*”;

5. When two users are connected, the display shows the message “INTERCOM.” and the operator can

replace the handset. As soon as the conversation ends, the concierge goes back to the stand-by

condition. The intercommunication can be interrupted at any time by the operator picking up the handset

and pressing “#”.

6. If there are other booked calls (the concierge rings) the operator can restart from step (1) otherwise the

concierge will go back to the stand-by condition.

Any conversation in progress can be interrupted at any time by an external call (External calls take priority).

Call from the Digital Concierge to the apartment

The operator can contact any apartment from the concierge by picking up the handset, entering the relevant

apartment number and pressing “*”;

1. the display shows “CALLING”;

2. if the user answers, the display will show “SPEAK”. If the user doesn’t answer, the operator can end

the call by replacing the handset.

The communication can be interrupted at any time by an external call (External calls take priority).

Receiving alarms from an apartment

The concierge can receive and store up to 48 alarms from the apartments.

1. the concierge starts to emit an acoustic signal on every alarm received and at the same time the display

shows the message “ALARM” until the operator clears all alarms;

2. to clear the received alarms, the operator must press for 1sec “A” without picking up the handset; then

the display will show the message “ALARM:XXXXXX” on the first row and the message “N:YY” on the

second row where “XXXXXX” is the flat number where the alarm has been generated and “YY” is the

number of alarms to clear including the one shown.

When “YY” = 1 (last alarm), the concierge stops emitting the acoustic signal; press “A” again and the

concierge will return to stand-by mode.

OPERATION NOTES

a. To use the letters “E” to “H” press the relevant button twice: “A” becomes “E”, “B” becomes “F”, “C”

becomes “G” and “D” becomes “H”;

Opening the speech from the concierge to a door station without being called first: With the concierge in DAY

or NIGHT mode, pick up the handset, select a number from 1 – 9 (For doors addressed from 1 – 9) and then

press “”. The display will show ‘SPEAK’ once the speech path has been established.

Opening a door from the concierge without being called first With the concierge in DAY or NIGHT mode, pick

up the handset, select a number from 1 – 9 (For doors addressed from 1 – 9) and then press the “ ” button.

The display will show ‘DOOR OPEN’.

DIP-SWITCHES

Switch Status Operation

ON Divert a call address 180 if the call is not answered within 20 seconds.

ON Enable parallel connection of 2 concierges. This switch must be “ON” for Both concierges.

ON Enable the use of Art.2204N isolation PCB’s.

Disable alarms. Alarms can instead be processed by one or more Art.512DR if installed in the

system and addressed as 255.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 67 68

Commentaires sur ces manuels

Pas de commentaire

Videx VX2200 Guide de dépannage Page 25

Commentaires sur ces manuels

Produits connexes et manuels pour Interphones de porte Videx VX2200